Most up-to-date Cisco 642-035 pdf

Q1. A local storage installation of ESX on a Cisco UCS C-Series server has failed due to local storage issues. What is the cause of the problem? 

A. LSI drivers are not bundled with ESX. 

B. The hard drive has a 1-TB partition size. 

C. The server only has an onboard controller, while ESX requires an LSI RAID controller card. 

D. ESX is not supported on Cisco UCS C-series servers. 

View Answer

Q2. Which of these does not have an FSM associated with it? 

A. vCenter connection 

B. service profile 

C. server hardware 

D. service profile templates 

View Answer

Q3. Which piece of information does the FSM provide? 

A. the current task and status 

B. a collection of blade statistics 

C. the last user to access the resource 

D. a list of faults currently suppressed by the Cisco UCS Manager 

View Answer

Q4. A customer would like to create an Ethernet traffic monitoring session on a Cisco UCS server to troubleshoot network connectivity. The customer has entered the following commands via CLI: 

UCS-A# scope eth-traffic-mon UCS-A /eth-traffic-mon # scope fabric a UCS-A /eth-traffic-mon/fabric # create eth-mon-session EthMonitor33 UCS-A /eth-traffic-mon/fabric/eth-mon-session* # create dest-interface 2 12 UCS-A /eth-traffic-mon/fabric/eth-mon-session/dest-interface* # set speed 20gbps UCS-A /eth-traffic-mon/fabric/eth-mon-session/dest-interface* # commit-buffer UCS-A /eth-traffic-mon/fabric/eth-mon-session/dest-interface # 

Which outcome will this command sequence produce? 

A. It will create an Ethernet traffic monitoring session to copy and forward traffic to the destination port at slot 2, port 12, will set the admin speed to 20 Gb/s, and will commit the transaction. 

B. It will create an Ethernet traffic monitoring session to copy and forward traffic to the destination port at slot 2, port 33, will set the admin speed to 20 Gb/s, and will commit the transaction. 

C. It will create an Ethernet traffic monitoring session to copy and forward traffic to the destination port at slot 33, port 12, will set the admin speed to 20 Gb/s, and will commit the transaction. 

D. It will create an Ethernet traffic monitoring session to copy and forward traffic to the destination port at slot 2, port 12, will set the admin speed to 10 Gb/s, and will commit the transaction. 

View Answer

Q5. Which of these is a supported Cisco C-Series integration topology? 

A) 

B) 

C) 

D) 

A. Exhibit A 

B. Exhibit B 

C. Exhibit C 

D. Exhibit D 

View Answer

Q6. Which three are valid tech support bundles to collect in the local management shell? (Choose three.) 

A. UCSM 

B. UCSM-MGMT 

C. Port-Channel 

D. Adapter 

E. SAN 

F. FEX 

View Answer

Q7. A customer calls in a trouble ticket complaining of unacceptable read I/O latency on a Cisco UCS C210 M2 server with an LSI MegaRAID 9260-8i with an 8-disk RAID-10 virtual disk. As you validate the RAID controller configuration, which of these configured items impacts read performance at the controller level? 

A. all disks are 146GB 6 Gb SAS 15K RPM SFF 

B. read ahead cache is enabled 

C. BGI rate = 0 

D. strip size = 256k 

E. no hot spare 

View Answer

Q8. During a password recovery of a Cisco UCS system in a cluster configuration, what happens to blade traffic? 

A. There is no interruption to traffic, as the fabrics go down one at a time. 

B. Traffic stops flowing until the process is complete. 

C. There is no interruption to traffic because both fabrics stay up the whole time. 

D. Traffic will continue to flow, but at a limited rate until the process is complete. 

View Answer

Q9. While updating firmware in a Cisco UCS environment, what will the Cisco UCS Manager do? 

A. show you all versions available on Cisco.com 

B. show you all versions downloaded to the Cisco UCS Manager 

C. show you only versions that are supported in your environment 

D. show you only versions that you selected to show 

E. show you old and new versions from your download 

View Answer

Q10. Which actions on a Cisco UCS Server can be performed under the Cisco IMC utilities? (Choose Four.) 

A. export tech support information to a remote host 

B. download a tech support file locally 

C. reboot the Cisco IMC 

D. recover a corrupt BIOS 

E. install firmware updates 

View Answer