What 100% Correct 642-035 examcollection Is?

Q1. A Cisco UCS chassis has two ports on I/O Module 1 connected to Fabric Interconnect A, and two ports on I/O Module 2 connected to Fabric Interconnect B. The I/O modules are connected to ports 1 and 2 on their respective fabric interconnects, and end host mode is configured. After a link failure occurs on port 1 of I/O Module 1, what happens to the traffic that was pinned to that link? 

A. The traffic fails until the link issue is resolved. 

B. The traffic is repinned to I/O Module 2 link 1, which is connected to Fabric Interconnect 

C. The traffic is repinned to the remaining link between I/O Module 1 and Fabric Interconnect A. 

D. The traffic is repinned automatically to Fabric Interconnect B. 

View Answer

Q2. A customer is trying to boot an operating system installed on a Cisco UCS B-Series blade server after a RAID1 cluster migration. The RAID LUN remains in inactive state during and 

after the service profile association and the server does not boot. What is the cause of this problem? 

A. RAID1 is not supported in cluster migration mode on a Cisco UCS B-Series blade server. 

B. The local disk configuration policy in the service profile on the server is configured with Any Configuration mode rather than RAID1. 

C. The server needs to be booted via SAN in cluster migration to support RAID1. 

D. The Cisco UCS B-Series blade server has older firmware that needs to be updated first. 

View Answer

Q3. Which of these does not have an FSM associated with it? 

A. vCenter connection 

B. service profile 

C. server hardware 

D. service profile templates 

View Answer

Q4. Which two Cisco Nexus 2000-Series Fabric Extenders support connections to both Cisco Nexus 5000 Series Switches and Cisco Nexus 7000 Series Switches? (Choose two.) 

A. Cisco Nexus 2248TP 

B. Cisco Nexus 2248TP-E 

C. Cisco Nexus 2232PP 

D. Cisco Nexus 2232TM 

View Answer

Q5. Which three are valid tech support bundles to collect in the local management shell? (Choose three.) 

A. UCSM 

B. UCSM-MGMT 

C. Port-Channel 

D. Adapter 

E. SAN 

F. FEX 

View Answer

Q6. Which two types of ports does end host mode switching have? (Choose two.) 

A. VSS 

B. border 

C. router 

D. server 

E. STP 

F. client 

View Answer

Q7. You successfully install VMware ESXi 5.0 U1 on a Cisco UCS B200 M3 server to a Fibre Channel LUN. When you reboot the server, you see the message "Reboot and Select Proper Boot device or insert Boot Media in selected Boot device and press a key." What are the first two pieces of information you should gather to troubleshoot the boot failure? (Choose two.) 

A. Connect to the NX-OS shell via the CLI and run the show npv flogi-table command. 

B. SSH to the MDS 9124 and run the show flogi database command. 

C. Validate the boot target WWPN and LUN ID in the service profile. 

D. Validate the correct source WWPN in the service profile vHBA definition. 

E. Validate zoning for your WWPN on the Cisco MDS 9124. 

F. Validate that the boot order indicates the vHBA as the first device. 

G. Ensure LUN masking is correctly configured on the storage controller. 

View Answer

Q8. While attempting to boot a Cisco UCS server from SAN, you are unable to see the LUN. Which of these are causing the problem? (Choose three.) 

A. VHBA template 

B. RAID policy 

C. zoning 

D. LUN ID 

E. vACLs 

F. disjoint fabrics 

View Answer

Q9. You are installing Microsoft Windows Server 2008 R2 on a Cisco UCS C210 M2 server, and the installer does not see local storage on the LSI MegaRAID SAS 9260-4i controller that is installed. Which statement explains the issue? 

A. The driver is not included in the installer DVD. Press F6 to load the LSI RAID driver from CD or virtual media. 

B. The virtual disk is not created and online. 

C. The LSI 9260-4i is only supported by Red Hat Enterprise Linux and VMware vSphere 

4.0 and later. 

D. The installer DVD for Microsoft Windows Server 2008 R2 did not include the LSI driver until SP2. 

View Answer

Q10. When using the Cisco UCS Manager GUI to troubleshoot a suspected bad memory, which 

logs contain data that are related to the faulty DIMM? 

A. the System Event log and Faults log that are located under the Admin tab 

B. the Events log and Faults log that are located under the Admin tab 

C. the System Event log that is located under the Server tab in the Navigation panel and the Faults log that is located under the Admin tab 

D. the System Event log that is located under the Equipment tab and the Faults log that is located under the Admin tab 

View Answer