Free of 642-035 practice test materials and Q&A for Cisco certification for customers, Real Success Guaranteed with Updated 642-035 pdf dumps vce Materials. 100% PASS Troubleshooting Cisco Data Center Unified Computing exam Today!


2026 New 642-035 Exam Dumps with PDF and VCE Free: https://www.surepassexam.com/642-035-exam-dumps.html

Q1. Which command sequence in the Cisco UCS C-Series rack server CLI sends tech support data to a TFTP server? 

A. ucs-c250 / # scope cimc ucs-c250 /cimc # scope tech-support ucs-c250 /cimc/tech-support # set path default.tar.gz ucs-c250 /cimc/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /cimc/tech-support *# commit 

B. ucs-c250 / # scope system ucs-c250 /system # scope tech-support ucs-c250 /system/tech-support # set path default.tar.gz ucs-c250 /system/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /system/tech-support *# commit 

C. ucs-c250 / # scope support ucs-c250 /support # scope tech-support ucs-c250 /support/tech-support # set path default.tar.gz ucs-c250 /support/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /support/tech-support *# commit 

D. ucs-c250 / # scope fault ucs-c250 /fault # scope tech-support ucs-c250 /fault/tech-support # set path default.tar.gz ucs-c250 /fault/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /fault/tech-support *# commit 

Answer: A 

Q2. Which three Cisco UCS server components can be upgraded via a host firmware package? (Choose three.) 

A. BIOS 

B. Cisco UCS Manager 

C. I/O module 

D. Cisco IMC 

E. fabric interconnect 

F. adapter 

G. board controller 

Answer: AFG 

Q3. Which log file in Cisco UCS Manager contains information about which user took a specific action? 

A. user access log 

B. system change log 

C. audit log 

D. access control log 

Answer: C 

Q4. A customer is configuring VSANs in a Cisco UCS domain. After configuring the VSANs 3840, 3841, and 3842 in FC end-host mode, the customer sees that these VSANs are not operational and that Cisco UCS Manager is raising faults. What is the cause of this problem? 

A. VSANs 3840, 3841, and 3842 should be in the allowed list on the trunk to clear the fault. 

B. VSANs 3840 to 4079 cannot be used in Fibre Channel end-host mode in a Cisco UCS domain. 

C. The fabric interconnect needs to be configured in switching mode and the VSANs need to be allowed on the trunk. 

D. Use the UCS CLI to clear the fault on the VSAN trunk to forward the VSANs with faults. 

Answer: B 

Q5. You are attempting to install Microsoft Server 2008 R2 on a Fibre Channel LUN, but the installer does not see the LUN. You have used F6 to load the appropriate SCSI driver. What should your first troubleshooting step be? 

A. Email the SAN administrator to validate that your LUN is defined. 

B. Check the configuration of the vHBA in the service profile. 

C. Validate that the boot order is correct. 

D. Validate zoning on the Fibre Channel switch. 

E. Validate that the Fibre Channel uplink from the fabric interconnect is up. 

Answer: B 

Q6. Refer to the exhibit. 

Using RBAC for security in a Cisco UCS environment, what is seen in the exhibit? 

A. custom role 

B. default role 

C. LDAP group map 

D. external service profile 

Answer: B 

Q7. Which protocols can be used to send to Cisco TAC (Technical Assistance Center) the show tech-support command output information about the Cisco UCS domain? (Choose two.) 

A. TFTP 

B. FTP 

C. SCP 

D. Telnet 

E. SecureTelnet 

Answer: BC 

Q8. A customer is configuring the dynamic vNIC connection policy in a Cisco UCS domain. Why is the dynamic vNIC policy required? 

A. It is only required if you are configuring VM-FEX. 

B. It is only required if you are configuring Adapter-FEX. 

C. It is mainly for the Cisco UCS Manager to communicate with the fabric interconnect. 

D. It is required for Cisco UCS instances that include servers with VIC adapters on which you have installed VMs and configured dynamic vNICs. 

Answer: D 

Q9. Which actions on a Cisco UCS Server can be performed under the Cisco IMC utilities? (Choose Four.) 

A. export tech support information to a remote host 

B. download a tech support file locally 

C. reboot the Cisco IMC 

D. recover a corrupt BIOS 

E. install firmware updates 

Answer: ABCD 

Q10. Which statement is true about system event logs? 

A. By default, they require manual clearing. 

B. They report operating system crashes and errors. 

C. They are also referred to as system error logs. 

D. They can only be accessed from Cisco UCS Manager. 

Answer: A