Exam Code: 300-360 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: Designing Cisco Wireless Enterprise Networks
Certification Provider: Cisco
Free Today! Guaranteed Training- Pass 300-360 Exam.


2026 New 300-360 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-360/

Q1. When reviewing a design for a voice over wireless deployment, what per-call bandwidth cost should be factored in when determining maximum calls per cell using SIP and G.711u as the codec?

A. 64 bytes 

B. 8 bytes

C. 80 bytes

D. 10 bytes

Answer: C

Q2. An engineer is preparing for an active site survey of a warehouse and is informed that they should not enter any areas that are blocked by supplies that are difficult to move. Which option describes how the engineer should address this restriction?

A. Extrapolate restricted access areas by drawing circles for AP coverage

B. Survey hallways, common areas, and storerooms.

C. Utilize a predictive tool to define coverage in off-limits areas.

D. Educate the customer about the importance of accurate and complete measurements.

Answer: D

Q3. When conducting a wireless survey at a customer facility, signal attenuation in an area that is surrounded by thick glass walls is noted as 2dB. When configuring Cisco Prime Infrastructure, which obstacle should be placed in a map editor to represent the impact the glass wall will have on the RF signal in the facility?

A. heavy door

B. thick wall

C. glass

D. light wall

Answer: D

Explanation: Reference: http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-2/configuration/guide/pi_12_cg/maps.html Table 6-4

Q4. Cisco 7925G phones are experiencing intermittent connectivity issues. The wireless survey reveals that the facility has no current coverage holes. The radios on the 2.4GHz channel have all been statically set to power level 1. Which two reasons could explain why the phones are having issues on this wireless network? (Choose two.)

A. The phones are experiencing excessive co-channel interference.

B. The phones only operate on the 2.4 GHz band when the power level is above 25 mW.

C. The phones are not transmitting at the same power levels as the access points.

D. The phones are experiencing delays of less than 30 ms within their coverage cell.

E. The phones are receiving greater than -67 dBm RSSI on the 2.4 GHz band.

Answer: A,C

Q5. An engineer is deploying an outdoor Mesh network. Which four major factors should be considered? (Choose four.)

A. power

B. buildings

C. traffic lights

D. satellite dishes

E. line of sight

F. network connectivity

G. power lines

H. mounting

Answer: A,E,F,H

Q6. A customer has a business-critical voice network and wants to be alerted whenever voice clients move out of a coverage area and experience RSSI below -67 dBm on the 5 GHz band. Which option can be configured on the wireless controller to alert network administrators when this limit is surpassed?

A. EDCA; voice optimized

B. SIP voice sample interval

C. 802.11a voice RSSI coverage threshold

D. traffic stream metrics

Answer: C