It is more faster and easier to pass the Cisco 300-360 exam by using Pinpoint Cisco Designing Cisco Wireless Enterprise Networks questuins and answers. Immediate access to the Renew 300-360 Exam and find the same core area 300-360 questions with professionally verified answers, then PASS your exam with a high score now.


2026 New 300-360 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-360/

Q1. An engineer is deploying centralized wireless solution with a 5508 controller. What is the most AP licenses that can be supported?

A. 100

B. 250

C. 1000

D. 500

Answer: D

Explanation:

You can order Cisco 5500 Series Controllers with support for 12, 25, 50, 100, 250 or 500 APs as the controller's base capacity. You can add additional AP capacity through capacity adder licenses available at 25, 50, 100 and 250 AP capacities. You can add the capacity adder licenses to any base license in any combination to arrive at the maximum capacity of 500 APs.

Reference: http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/112926-5508wlc-license.html

Q2. Which three recommendations must be taken into consideration when an engineer is installing a new Voice WLAN? (Choose three.)

A. Use the Cisco wireless phone site survey client utility.

B. Use a separate Cisco Wireless Lan Controller.

C. Enable load balance on voice WLANs.

D. Maintain -67dBM as a minimal RSSI.

E. Set data for 2.4 GHz and voice for 5 GHz using separate SSIDs.

F. Enable lower data rates for 2.4-GHz data WLAN.

Answer: A,D,E

Q3. A customer wants to implement a wireless network in a historic location, but is concerned about the structural and aesthetic impact to the facility. Which benefit of using wireless mesh addresses these concerns?

A. Power is required only at the installation location.

B. The APs do not have LED lights.

C. More wireless channels can be supported.

D. APs do not need network connections.

Answer: D

Q4. What is the optimal distance between APs for location services without considering the physical environment?

A. 10 to 25 feet

B. 90 to 120 feet 

C. 50 to 70 feet

D. 80 to 100 feet

Answer: C

Explaination: Reference: http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/emob41dg/emob41dg-wrapper/ch13Loca.html

Q5. Cisco 7925G phones are experiencing intermittent connectivity issues. The wireless survey reveals that the facility has no current coverage holes. The radios on the 2.4GHz channel have all been statically set to power level 1. Which two reasons could explain why the phones are having issues on this wireless network? (Choose two.)

A. The phones are experiencing excessive co-channel interference.

B. The phones only operate on the 2.4 GHz band when the power level is above 25 mW.

C. The phones are not transmitting at the same power levels as the access points.

D. The phones are experiencing delays of less than 30 ms within their coverage cell.

E. The phones are receiving greater than -67 dBm RSSI on the 2.4 GHz band.

Answer: A,C

Q6. A customer has deployed an N+N redundant wireless infrastructure. In this deployment, the access points have been salt and peppered between controllers. What configuration would be necessary to cut down on the use of mobility tunnels for voice clients?

A. mobility anchor

B. KIS based CAC

C. media session snooping

D. re-anchor roamed voice clients

Answer: D