Ucertify 300-365 Questions are updated and all 300-365 answers are verified by experts. Once you have completely prepared with our 300-365 exam prep kits you will be ready for the real 300-365 exam without a problem. We have Up to the minute Cisco 300-365 dumps study guide. PASSED 300-365 First attempt! Here What I Did.


2026 New 300-365 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-365/

Q1. A wireless engineer wants to enable optimized roaming for their 5GHz wireless network with these settings: -72dBm RSSI value, 25% coverage exception level percentage, and a minimum of 50 packets received. 

Which two commands achieve these settings? (Choose two.) 

A. config advanced 802.11a coverage data fail-percentage 25 

B. config advanced 802.11b optimized-roaming enable 

C. config advanced 802.11b coverage data rssi-threshold -72 

D. config advanced 802.11a optimized-roaming enable 

E. config advanced 802.11a coverage data rssi-threshold -72 

Answer: A,D 

Q2. Refer to Exhibit. 

What two items need to be supported on the VoWLAN phones in order to take full advantage of this WLAN configuration? (Choose two.) 

A. APSD 

B. 802.11a 

C. 802.11e 

D. WMM 

E. 802.11r 

F. SIFS 

Answer: C,D 

Q3. What is the default NMSP echo interval between a Mobility Services Engine and Wireless LAN Controller? 

A. 30Seconds 

B. 15 Seconds 

C. 10 Seconds 

D. 60 Seconds 

Answer: B 

Q4. Which show command will show whether a WLAN is locally or centrally switched on a Cisco Wireless Lan Controller? 

A. show ap config general Cisco_AP 

B. show wlan wlan_id 

C. show flexconnect summary 

D. show flexconnect group detail 

Answer: B 

Q5. An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN. Which configuration is needed to complete this task? 

A. Change the AVC application WebEx-app-sharing to mark 

B. Create an ACL for WebEx. 

C. Change the WLAN reserved bandwidth for WebEx. 

D. Create an AVC profile for WebEx marked with a lower DSCP value 

Answer: A 

Q6. Controllers WLC_1 and WLC_2 are in the same mobility group. A wireless client that does not have the same VLAN interface roams from WLC_1 to WLC_2. What happens to the client roaming? 

A. The client context is deleted in controller WLC_1, and a new client context is created in WLC_2 to become the anchor controller 

B. The client context is moved from controller WLC_1 to controller WLC_2. The result is that the WLC_1 client context is deleted and WLC_2 becomes the anchor controller. 

C. The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the foreign controller and WLC_2 becomes the anchor controller. 

D. The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the anchor controller and WLC_2 becomes the foreign controller. 

Answer: D 

Q7. An engineer used an interface group under the SSID configuration, but noticed that a test client is getting an IP assigned in a different VLAN from the DHCP server. Which two options override the interface group configuration on the SSID? (Choose two.) 

A. static VLAN on client 

B. ACL 

C. AP group 

D. static IP on client 

E. MAC filtering 

F. RF group 

G. AAA override 

Answer: C,G 

Q8. A downstream packet containing a DSCP value arrives at the WLC Ethernet interface from the wired source network. The WLC is configured for QoS WLAN 802.1p mapping. How does the WLC treat the CAPWAP QoS marking when leaving the controller interface for the respective AP and final wireless client destination? 

A. No outer CAPWAP or inner QoS tagging is applied. 

B. No outer CAPWAP QoS tag is applied, but the original DSCP is maintained inside CAPWAP. 

C. The outer CAPWAP CoS is marked and capped while the inner DSCP maintains the original marking. 

D. The outer CAPWAP DHCP is marked and capped without any inner DSCP value. 

Answer: C 

Q9. CMX Facebook WiFi can allow access to the network before authentication. Which two of the following options are available? (Choose two) 

A. Allow all the traffic before authentication and intercept HTTPs only. 

B. Allow HTTP traffic only before authentication and block all the traffic. 

C. Allow SNMP traffic only before authentication and block all the traffic. 

D. Allow all the traffic before authentication and intercept HTTP only. 

E. Allow HTTPs traffic only before authentication and block all other traffic. 

Answer: B,D 

Q10. VoWLAN implementation plans for a current mix of existing Cisco Unified Wireless IP Phones 7920G and 7921G to a final migration of Wireless IP Phones 7925G in a single WLAN. What would be the most appropriate WLC WLAN configuration to end with Wireless IP Phones 7925G? 

A. 7920 Client CAC = enabled only; Radio Policy = All; WMM = Disabled 

B. 7920 AP CAC = enabled only; Radio Policy = All; WMM = Allowed 

C. 7920 Client CAC = enabled only; Radio Policy = 802.11a only; WMM = Disabled 

D. 7920 AP CAC = enabled only; Radio Policy = 802.11a only; WMM = Allowed 

E. 7920 Client CAC = enabled only; Radio Policy = 802.11b/g only; WMM = Disabled 

F. 7920 AP CAC = enabled only; Radio Policy = 802.11b/g only; WMM = Allowed 

Answer: B