Exambible 300-365 Questions are updated and all 300-365 answers are verified by experts. Once you have completely prepared with our 300-365 exam prep kits you will be ready for the real 300-365 exam without a problem. We have Renovate Cisco 300-365 dumps study guide. PASSED 300-365 First attempt! Here What I Did.


2026 New 300-365 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-365/

Q1. An engineer must deploy FlexConnect APs to a site that typically has 300 ms latency to the WLC. Which typical operating mode must the engineer plan on for normal operations? 

A. local authentication, local switching 

B. central authentication, central switching 

C. central authentication, local switching 

D. connected mode 

Answer: A 

Q2. A customer has "quiet" wireless clients that use static IP addresses. Which two WLAN configurations are required for these wireless clients to connect properly? (Choose two.) 

A. Disable DHCP address assignment required. 

B. Enable passive client. 

C. Disable allow AAA override. 

D. Enable static IP tunneling. 

E. Disable DHCP server override. 

Answer: A,E 

Q3. A customer has implemented several WLANs in an auditorium utilizing a newly dedicated WLC and is experiencing excessive channel utilization regardless of occupancy. Which action reduces channel utilization without removing SSIDs? 

A. Disable MCS data rates 0 through 11. 

B. Disable MCS data rates used by 40 MHz channels. 

C. Disable data rates that use CCK. 

D. Disable VHT data rates. 

Answer: C 

Q4. Refer to Exhibit. 

What two items need to be supported on the VoWLAN phones in order to take full advantage of this WLAN configuration? (Choose two.) 

A. APSD 

B. 802.11a 

C. 802.11e 

D. WMM 

E. 802.11r 

F. SIFS 

Answer: C,D 

Q5. A WLAN engineer has been asked to upgrade the software on a MSE 3365 Appliance. The engineer cannot access the system using the root password and the Grub password as the details had never been documented. How should the engineer perform the password recovery? 

A. Use a console cable. 

B. Contact Cisco TAC and arrange an RMA of the MSE. 

C. Boot the MSE using the software installation DVD. 

D. The Password can be reset using Prime Infrastructure. 

Answer: A 

Q6. A FlexConnect remote office deployment is using five 2702i APs indoors and two 1532i APs outdoors. When a code upgrade is performed and FlexConnect Smart AP Image Upgrade is leveraged, but no FlexConnect Master AP has been configured. How many image transfers between the WLC and APs will occur? 

A. 7 

B. 1 

C. 5 

D. 2 

Answer: D 

Q7. Controllers WLC_1 and WLC_2 are in the same mobility group. A wireless client that does not have the same VLAN interface roams from WLC_1 to WLC_2. What happens to the client roaming? 

A. The client context is deleted in controller WLC_1, and a new client context is created in WLC_2 to become the anchor controller 

B. The client context is moved from controller WLC_1 to controller WLC_2. The result is that the WLC_1 client context is deleted and WLC_2 becomes the anchor controller. 

C. The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the foreign controller and WLC_2 becomes the anchor controller. 

D. The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the anchor controller and WLC_2 becomes the foreign controller. 

Answer: D 

Q8. Which two options are limitations of using an AP as a workgroup bridge? (Choose two.) 

A. Only factory-configured MAPs can support WGB mode. 

B. MAPs that are configured in WGB mode do not answer S36 radio measurement requests. 

C. A limited subset of Layer 2 security types are supported for wireless clients of a WGB. 

D. There is a limit of 20 wired client devices. 

E. Multiple VLANs are not supported for wireless clients. 

Answer: B,D 

Q9. A network engineer observes a spike in controller CPU overhead and overall network utilization after enabling multicast on a controller with 500 APs. What feature is necessary to correct the issue? 

A. controller IGMP snooping 

B. unicast AP Multicast Mode 

C. broadcast forwarding 

D. multicast AP Multicast Mode 

Answer: B 

Q10. A customer requires that the remote site be able to utilize local servers when the AP is in WAN-down (standalone mode). Which AP mode must be configured on the wireless controller? 

A. SE-Connect 

B. Monitor 

C. Local 

D. FlexConnect 

E. Sniffer 

F. Rogue Detector 

Answer: D