Act now and download your Cisco 300-365 test today! Do not waste time for the worthless Cisco 300-365 tutorials. Download Renovate Cisco Deploying Cisco Wireless Enterprise Networks exam with real questions and answers and begin to learn Cisco 300-365 with a classic professional.


2026 New 300-365 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-365/

Q1. A network engineer for a college dormitory notices that student devices are filling up the SP-DB and are not allowing the shared wireless printers to be discovered. Which feature can be used to reserve space in the SP-DB for the printers? 

A. mDNS-AP 

B. LSS 

C. Priority MAC 

D. sso 

Answer: C 

Q2. Which two methods to discover a controller does a MAP attempt when it boots up? (Choose two.) 

A. |f Ethernet and wireless are available, it attempts to discover only via Ethernet. 

B. if Ethernet is disconnected, it attempts to connect wirelessly using AWPP. 

C. if only wireless is available and it is configured as a MAP, it does not attempt to connect to a WLC. 

D. If Ethernet and wireless are available, it uses Ethernet first. If it cannot connect via Ethernet, then it chooses wireless. 

E. |f Ethernet is disconnected, it attempts to connect wirelessly using the configured DHCP option. 

Answer: A,B 

Q3. Which network is connected by default when connecting to the unused Ethernet port of a MAP? 

A. the native VLAN that the MAP is connected to 

B. the VLAN that is associated with WLAN number 1 in the WLC 

C. the native VLAN that the WLC is connected to 

D. the VLAN that is associated with the SSID that the MAPs are communicating on 

Answer: A 

Q4. Refer to Exhibit. 

A wireless client is connecting to FlexAPI which is currently working standalone mode. The AAA authentication process is returning the following AVPs: 

Tunnel-Private-Group-ld(81): 15 Tunnel-Medium-Type(65):IEEE-802(6) Tunnel-Type(64): VLAN(13) 

Which three behaviors will the client experience? (Choose three.) 

A. While the AP is in standalone mode, the client will be placed in VLAN 15. 

B. While the AP is in standalone mode, the client will be placed in VLAN 10. 

C. When the AP transitions to connected mode, the client will be de-authenticated. 

D. While the AP is in standalone mode, the client will be placed in VLAN 13. 

E. When the AP is in connected mode, the client will be placed in VLAN 13. 

F. When the AP transitions to connected mode the client will remain associated. 

G. When the AP is in connected mode, the client will be placed in VLAN 15. 

H. When the AP is in connected mode, the client will be placed in VLAN 10. 

Answer: A,D,E 

Q5. CORRECT TEXT 

Scenario 

One of your colleagues has setup a test network in the lab to simulate a new building atone of your regional offices. Your team is testing AP failover. Your colleague has requested you to configure the WLCs so that in the event of a loss of one of the WLCsthe other wings APs will fail over to the remaining WLC. 

The APs on the East-WLC-2504A should fail over to the West-WLC2-2504A, and the APs on the West-WLC2-2504A should fail over to the East-WLC-2504A. 

Set the priority of the APs so the backup controller recognizes the join request from the higher-priority AP and if necessary disassociates a lower-priority AP to provide access to an available port. 

Not all menus, tabs and features are supported. 

Topology 

Answer:  

Q6. You have set up FlexConnect APs. For which scenario is Fast Roaming supported, providing the WLAN is mapped to the same VLAN and the client is roaming to an AP on the same Cisco WLC? 

A. central switching with PMK (OKC) between different FlexConnect groups 

B. local switching with Cisco Centralized Key Management within the same FlexConnect group 

C. central switching with Cisco Centralized Key Management between different FlexConnect groups 

D. local switching with PMKID within the same FlexConnect group 

Answer: B