Accurate 70-743 Dumps 2021

NEW QUESTION 1
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2021.
Each server has an operating system disk and four data disks. All of the disks are locally attached SATA disks.
Each disk is a basic disk, is initialized as an MBR disk, and has a single NTFS volume.
You plan to implement Storage Spaces Direct by using the data disks on Server1 and Server2. You need to prepare the data disks for the Storage Spaces Direct implementation.
What should you do?

• A. Format the volumes on the data disks as exFAT.
• B. Initialize the data disks as GPT disks and create a ReFS volume on each disk.
• C. Convert the data disks to dynamic disks.
• D. Delete the volumes from the data disk

Answer: D

NEW QUESTION 2
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2021. The servers have the same hardware configuration.
You need to asynchronously replicate volume F: from Server1 to Server2. What should you do?

• A. Install the Failover Clustering feature and create a new cluster resource group.
• B. Run Set-DfsrServiceConfiguration and specify the –RPCPort parameter.
• C. Run New-SRPartnership and specify the –ReplicationMode parameter.
• D. Install the Failover Clustering feature and use Cluster Shared Volumes (CSV).

Answer: C

Explanation: Run New-SRPartnership and specify the –ReplicationMode parameter. References:
https://www.starwindsoftware.com/blog/how-to-configure-storage-replication-using-windowsserver- 2021-part-2

NEW QUESTION 3
You create a Nano server image named Nano1.vhdx by using the New-NanoServerImage cmdlet. You attach Nano1.vhdx to a Generation 1 virtual machine named Nano1.
When you start Nano1, you get the following error message: “Boot failure. Reboot and select proper Boot device or Insert Boot Media in selected Boot device”
You need to successfully start Nano server. What should you do?

• A. Attach Nano1.vhdx to a SCSIcontroller.
• B. Recreate Nano1 as a Generation 2 virtual machine.
• C. Increase the memory of Nano1 to 512 Mb.
• D. Modify the BIOS settings of Nano1.

Answer: B

Explanation: A Generation 1 VM cannot boot from a vhdx disk; only a Generation 2 VM can boot from an vhdx disk.

NEW QUESTION 4
HOT SPOT
You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2021. Server1 and Server2 connect to the same network.
Server1 and Server2 have virtual switches configured as shown in the following table.

You have nine virtual machines configured as shown in the following table.

All of the virtual machines are configured to have IP addresses from the same network segment. The firewall on each of the virtual machines is configured to allow network connectivity.
To which virtual machines can you connect from VM1 and VM2? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 5
HOT SPOT
Scenario:
You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.

You install the Remote Access server role on Server2. Server2 has the following configured.
*Network address translation (NAT)
*The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2
You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2. End of Scenario:
You deploy a computer named Computer8 to subnet4. Computer8 has an IP address of 192.168.10.230 and a subnet mask of 255.255.255.240
What is the broadcast address for Subnet4? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 6
HOT SPOT
Your network contains an Active Directory forest named contoso.com. The forest has three sites named Site1, Site2 and Site3.
Distributed File System (DFS) for the forest is configured as shown in the exhibit.

The forest contains a server named Server2 that hosts the DFS namespace.
\Contoso.comNamespace1Folder2 has the following configuration.

\ContosoNamespace1Folder2 has the targets configured as shown in the following table.

For each of the following statement, Select Yes if Statement is true. Otherwise , select No.

Answer:

Explanation:

NEW QUESTION 7
You have two servers that run Windows Server 2021. The server are configured as shown in the following table.

You need to create a failover cluster that contains both servers.
Which two commands should you run? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
A.

B.

C.

D.

E.

Answer:

NEW QUESTION 8
You have multiple servers that run Windows Server 2021 and are configured as VPN servers. You deploy a server named NPS1 that has Network Policy Server (NPS) installed.
You need to configure NPS1 to accept authentication requests from the VPN servers. What should you configure on NPS1?

• A. From RADIUS Clients and Servers, add a remote RADIUS server group.
• B. From Policies, add a connection request policy.
• C. From Policies, add a network policy.
• D. From RADIUS Clients and Servers, add RADIUS client

Answer: D

NEW QUESTION 9
You have an Active Directory domain named contoso.com.
The computers in contoso.com are installed by using Windows Deployment Services.
You have a server named Server1 that runs Windows Server 2021. Server1 is a member of contoso.com. Server1 has the Hyper-V role installed. Virtual machines on Server1 are connected to an external switch named Switch1.
You create a virtual machine named VM1 on Server1 by running the following cmdlets.

You need to ensure that you can install the operating system on VM1 by using Windows Deployment Services.
What should you do?

• A. Add a legacy network adapter to VM1.
• B. Modify the SwitchType parameter of Switch1.
• C. Modify the DefaultFlowMinimumBandwidthWeigth parameter of Switch1.
• D. Add a SCSI controller to VM1.

Answer: A

Explanation: A legacy network adapter is required for PXE boot.
Not B: The switch is an External switch which is what is required.

NEW QUESTION 10
HOTSPOT
You have a virtual machine named VM1 that runs Windows Server 2021. VM1 is a Remote Desktop Services (RDS) server.
You need to ensure that only TCP port 3389 can be used to connect to VM1 over the network. Which command should you run on the Hyper-V host? To answer, select the appropriate options in the answer area.

Answer:

Explanation: References:
https://technet.microsoft.com/en-us/library/dn464289.aspx

NEW QUESTION 11
You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2021. The hosts are nodes in failover cluster.
You have a virtual machine named VM1. VM1 connects to a virtual switch named vSwitch1. You discover that VM1 automatically live migrates when vSwitch temporarily disconnects. You need to prevent VM1 from being live migrated when vSwitch1 temporarily disconnects. What should you do?

• A. From the network adapter setting of VM1, disable the Protected network setting.
• B. From the network adapter setting of VM1, disable the Heartbeat integration service.
• C. Run the Set-VMNetworkAdapter cmdlet and set IsmanagementOS to False.
• D. Run the Set-VMNetworkAdapter cmdlet and set StormLimit to 0.

Answer: A

NEW QUESTION 12
You need to implement network virtualization.
On which object should you configure the virtual subnet ID?

• A. Virtual switch
• B. Hyper-V server
• C. VM
• D. Virtual network adapter

Answer: A

NEW QUESTION 13
You have a Hyper-V failover cluster that contains three nodes. Virtual machines are distributed evenly across the cluster nodes.
You need to ensure that if a node loses connectivity from the other nodes, the virtual machines on the node will be transitioned to one of the remaining nodes after one minute.
Which settings should you modify?

• A. QuarantineDuration and QuarantineThreshold
• B. SameSubnetDelay and CrossSubnetDelay
• C. QuorumArbitrationTimeMax and RequestReplyTimeout
• D. ResiliencyPeriod and ResiliencyLevel

Answer: C

NEW QUESTION 14
HOT SPOT
You have a Hyper-V host named Server1 that runs Windows Server 2021.
You deploy a virtual machine named VM1 to Server1. VM1 runs Windows Server 2021. You need to ensure that you can install the Hyper-V server role on VM1.
Which command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 15
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a domain-based Distributed File System (DFS) namespace named Namespace1.
You need to view the shares to which users will be redirected when the users attempt to connect to a folder named Folder1 in the DFS namespace.
What cmdlet should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation: References:
https://docs.microsoft.com/en-us/powershell/module/dfsn/get-dfsnfolder?view=win10-ps

NEW QUESTION 16
You have a server named Server1 that runs Windows Server 2021.
On Server1, you use the Basic template to create a new Data Collector Set named CollectorSet1. You need to configure CollectorSet1 to generate performance alerts.
What should you do before you start CollectorSet1?

• A. Modify the performance counter data collector of CollectorSet1.
• B. Add a new data collector to CollectorSet1.
• C. Modify the configuration data collector of CollectorSet1.
• D. Add a new task to CollectorSet1.

Answer: A

Explanation: https://technet.microsoft.com/en-us/library/cc722414(v=ws.11).aspx

NEW QUESTION 17
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2021. Server1 is configured as a VPN server.
Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week.
You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Server Manager, You modify the Access Policies on Server1. Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 18
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of repeated scenario
Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows Server 2021 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.

The virtual machines are configured as follows: Each virtual machine has one virtual network adapter.
VM1 and VM2 are part of a Network Load Balancing (NLB) cluster.
All of the servers on the network can communicate with all of the virtual machines. End of repeated scenario.
You plan to implement nested virtual machines on VM1. Which two features will you be prevented from using for VM1?

• A. NUMA spanning
• B. Smart Paging
• C. Dynamic Memory
• D. live migration

Answer: C