Microsoft 70-743 Exam Dumps 2021

NEW QUESTION 1
You have a failover cluster named Cluster1.
A virtual machine named VM1 is a highly available virtual machine that runs on Cluster1. A custom application named App1 runs on VM1.
You need to configure monitoring on VM1. If App1 adds an error entry to the Application event log, VM1 should be automatically rebooted and moved to another cluster node.
Which tool should you use?

• A. Resource Monitor
• B. Failover Cluster Manager
• C. Server Manager
• D. Hyper-V Manager

Answer: B

Explanation: Do you have a large number of virtualized workloads in your cluster? Have you been looking for a solution that allows you to detect if any of the virtualized workloads in your cluster are behaving abnormally? Would you like the cluster service to take recovery actions when these workloads are in an unhealthy state? In Windows Server 2012/2021, there is a great new feature, in Failover Clustering called “VM Monitoring”, which does exactly that – it allows you monitor the health state of applications that are running within a virtual machine and then reports that to the host level so that it can take recovery actions.
VM Monitoring can be easily configured using the Failover Cluster Manager through the following steps:
References:
https://blogs.msdn.microsoft.com/clustering/2012/04/18/how-to-configure-vm-monitoring-inwindows- server-2012/

NEW QUESTION 2
HOT SPOT
Your network contains an Active Directory domain named adatum.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2021. The domain contains three users named User1, User 2 and User 3.
Server 1 has a share named Share1 that has the following configurations.

The Share permissions for Share1 are configured as shown in Share1 Exhibit.

Share1 contains a file named File1.txt. The Advanced Security settings for File1.txt are configured as shown in the File1.txt exhibit.

Select the appropriate statement from below. Select Yes if the state is true , otherwise no.

Answer:

Explanation:

NEW QUESTION 3
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2021. Server1 is configured as a VPN server.
Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week.
You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Active Directory Users and Computers, you modify the Dial-in Properties of the user accounts.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 4
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have an Active Directory domain that contains two Hyper-V servers named Server1 and Server2. Server1 has Windows Server 2021 installed. Server2 has Windows Server 2012 R2 installed.
Each Hyper-V server has three network cards. Each network card is connected to a different subnet. Server1 contains a dedicated migration network.
Server2 contains a virtual machine named VM5.
You plan to perform a live migration of VM5 to Server1.
You need to ensure that Server1 uses all available networks to perform the live migration of VM5. What should you run?

• A. the Mount-VHD cmdlet
• B. the Diskpart command
• C. the Set-VHD cmdlet
• D. the Set-VM cmdlet
• E. the Set-VMHost cmdlet
• F. the Set-VMProcessorcmdlet
• G. the Install-WindowsFeature cmdlet
• H. the Optimize-VHD cmdlet

Answer: E

Explanation: Set-VMHost -UseAnyNetworkForMigration
Specifies how networks are selected for incoming live migration traffic. If set to $True, any available network on the host can be used for this traffic. If set to $False, incoming live migration traffic is
transmitted only on the networks specified in the MigrationNetworks property of the host. References:
https://technet.microsoft.com/en-us/library/hh848524.aspx

NEW QUESTION 5
Your Network contains one Active Directory domain named contoso.com. You pilot DirectAccess on the network.
During the pilot deployment, you enable DirectAccess only for a group ContosoTest Computers. Once the pilot is complete, you need to enable DirectAccess for all the client computers in the domain.
What should you do?

• A. From Windows PowerShell, run the Set-DAClient cmdlet.
• B. From Windows PowerShell, run the Set-DirectAccess cmdlet.
• C. From Active Directory Users and Computers, modify the membership of the Windows Authorization Access Group.
• D. From Group Policy Management, modify the security filtering of an object named Direct Access Client Setting Group Policy.

Answer: D

NEW QUESTION 6
You have a server named Server1 that runs Windows Server 2021. Server1 is a Hyper-V host that hosts a virtual machine named VM1.
Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3.
You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.
What should you do?

• A. From Hyper-V Manager on Server1, modify the settings of VM1.
• B. From Windows PowerShell on VM1, run theSet-VmNetworkAdapterTeamMapping cmdlet.
• C. From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfiguration cmdlet.
• D. From Windows PowerShell on Server1, run the Set-VmSwitch cmdle

Answer: A

Explanation: You can configure NIC teaming in the Guest OS; however, before NIC teaming will work in a virtual machine, you need to enable NIC teaming in the Advanced Features section of the VM settings.

NEW QUESTION 7
You have a Windows Server 2021 failover cluster named Cluster1 that contains four nodes named Server1,
Server2, Server3, and Server4.
You need to configure Cluster1 to use directly attached storage to host several virtual machines. You run the Enable-ClusterStorageSpacesDirect cmdlet on Server1.
What should you do next?

• A. Run the Enable-ClusterStorageSpacesDirect cmdlet on the other three nodes.
• B. Create volumes.
• C. Create a storage pool.
• D. Run the Add-ClusterResource cmdlet on all of the node

Answer: B

NEW QUESTION 8
HOT SPOT
Your network is configured as shown in the network diagram.

Answer:

Explanation:

NEW QUESTION 9
You have a server named Server1 that runs Windows Server 2021. You need to configure Server1 as a Web Application Proxy. Which server role or role service should you install on Server1?

• A. Web Server (IIS)
• B. Network Policy and Access Services
• C. Direct Access and VPN (RAS)
• D. Active Directory Federation Services
• E. Remote Access

Answer: E

NEW QUESTION 10
You have an Active Directory forest that contains 30 servers and 6,000 Client computers. You deploy a new DHCP server that runs Windows Server 2021. You need to retrieve the list of the authorized DHCP servers. Which command should you run?

• A. Get-DHCPServerDatabase
• B. Netstat -p IP -s -a
• C. Get-DHCPServerInDc
• D. Show-ADAuthenticationPolicyExpression -AllowedToAuthenticateTo

Answer: C

Explanation: To get all authorized DHCP servers in Active Directory, you can use the following PowerShell cmdlet: Get-DhcpServerinDC

NEW QUESTION 11
You have a Windows Server 2021 Hyper-V failover cluster that contains two nodes named Node1 and Node2.
On Node1, you create a virtual machine named VM01 by using Hyper-V Manager.
You need to configure VM01 to move to Node2 automatically if Node1 becomes unavailable. What should you do?

• A. Form Failover Cluster Manager, run the Configure Role actions.
• B. From Windows PowerShell, run the Enable-VMReplication cmdlet.
• C. From Hyper-V Manager, click Node1, and then modify the Hyper-V settings.
• D. From Hyper-V Manager, click VM01, and click Enable Replicatio

Answer: A

Explanation: References:
http://windowsitpro.com/hyper-v/make-vm-highly-available-windows-server-2012

NEW QUESTION 12
Refer to Exhibit:

You plan to implement a VPN. FabRA1 will use the RADIUS proxy for authentication.
You need to ensure that VPN clients can be authenticated and can access internal resources. The solution must ensure that FabRS1 is used as a RADIUS server and FabRPl is used as a RADIUS proxy. Which two actions should you perform? Each correct answer presents part of the solution.

• A. Create a connection request policy on FabRSl.
• B. Create a connection request policy on FabRPl.
• C. Create a network policy on FabRSl.
• D. Delete the default connection request policy on FabRSl.
• E. Create a network policv on FabRP

Answer: BC

NEW QUESTION 13
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.
Your network contains an Active Directory forest
You install Windows Server 2021 on 10 virtual machines.
You need to deploy the Web Server (IIS) server role identically to the virtual machines. Solution: From Windows System Image Manager, you create an answer file, you copy the file to C:Sysprep on each virtual machine, and then you run the Apply-Image cmdlet.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 14
HOT SPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. You enable Response Rate Limiting on Server1. You need to prevent Response Rate Limiting from applying to hosts that reside on the network of 10.0.0.0/24. Which cmdlets should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation: https://docs.microsoft.com/en-us/powershell/module/dnsserver/setdnsserverresponseratelimiting? view=win10-ps

NEW QUESTION 15
HOTSPOT
Your company has a main office and a branch office. The two offices connect to each other by using a WAN link.
Your network contains an Active Directory forest named contoso.com. The forest contains a domain controller named DC1. All of the domain controllers are located in the main office.
You install a read-only domain controller (RODC) named RODC1 in the branch office.
You create a user account for a new user named User1. You add User1 to the Allowed RODC Password Replication Group. User1 starts work on Monday.
You are notified that the WAN link will be down for maintenance on Monday. You need to ensure that User1 can log on in the branch office site on Monday.
Which command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation: References:
https://technet.microsoft.com/en-us/library/cc742095(v=ws.11).aspx

NEW QUESTION 16
DRAG DROP
Your network contains two Hyper-V servers named Server1 and Server2. Server1 has Windows 2012 R2 installed. Server2 has Windows Server 2021 installed.
You perform a live migration of a virtual machine named VM1 from Server1 to Server2. You need to create a production checkpoint for VM1 on Server2.
What three Windows PowerShell cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation: We need to update the VM Version to enable the Production Checkpoints feature. Step 1: Stop-VM
The virtual machine should be shut down before upgrading it. Step 2. Update-VMVersion
To upgrade the virtual machine configuration version by using Windows PowerShell, use the Update- VMVersion cmdlet.
Step 3: CheckPoint-VM
The Checkpoint-VM cmdlet creates a checkpoint of a virtual machine. Note: There is no Upgrade-VMVersion cmdlet

NEW QUESTION 17
HOT SPOT
You install the DHCP Server role on a server1. You create a new scope on Server1. The scope properties are configured as shown in the following exhibit.


Use the drop down menus to select the answer choice that completes each statement based on the information presented in the graphics.

Answer:

Explanation:

NEW QUESTION 18
You deploy a Hyper-V server named Server1 in an isolated test environment. The test environment is prevented from accessing the Internet. Server1 runs the Datacenter edition of Windows Server 2021. You plan to deploy the following guest virtual machines on the server:

Which activation model should you use for the virtual machines?

• A. Multiple Activation Key (MAK)
• B. Key Management Service (KMS)
• C. Original Equipment Manufacturer (OEM) key
• D. Automatic Virtual Machine Activation (AVMA)

Answer: D

Explanation: https://technet.microsoft.com/en-us/library/dn303421(v=ws.11).aspx
AVMA lets you install virtual machines on a properly activated Windows server without having to manage product keys for each individual virtual machine, even in disconnected environments. AVMA binds the virtual machine activation to the licensed virtualization server and activates the virtual machine when it starts up. AVMA also provides real-time reporting on usage and historical data on the license state of the virtual machine. Reporting and tracking data is available on the virtualization server.