Microsoft 70-743 Dumps Questions 2021

NEW QUESTION 1
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 and a member server named Server2.
Server1 has the DNS Server role installed. Server2 has IP Address Management (IPAM) installed. The IPAM server retrieves zones from Server1 as shown in the following table.

The IPAM server has one access policy configured as shown in the exhibit. (Click the Exhibit button.)

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Answer:

Explanation: Box 1: Yes
As a member of the IPAM DNS Administrator Role of the ADatum zone, User1 can add DNS records to it. Box 2: Yes
As a member of the DNS Record Administrator Role of the Fabrikam zone, User1 can add DNS records to it. Box 3: No
DNS Record Administrators cannot delete zones, only administer DNS records. References:
https://technet.microsoft.com/en-us/library/hh831353(v=ws.11).aspx

NEW QUESTION 2
You have a server named Server1 that runs Windows Server 2021. Server1 has four SCSI disks and a storage pool named Pool1 that contains three disks.
You create a virtual disk named Disk 1 that uses a mirrored layout.
You create a partition named Partition1 that uses all of the available space on Disk 1. You need to extend Partition1.
What should you do first?

• A. From Windows PowerShell, run the Resize-Partition cmdlet.
• B. From Windows PowerShell, run the Resize-StorageTier cmdlet.
• C. From the Storage Pools page in Server Manager, extend a virtual disk.
• D. From Disk Management, extend a volume.

Answer: C

Explanation: References: https://charbelnemnom.com/2015/03/step-by-step-how-to-extend-and-resize-a-twoway- mirrored-storage-tiered-space-storagespaces-ws2012r2/

NEW QUESTION 3
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals. Refer to exhibit:

Server1 has two virtual machines named VM1 and VM that run Windows Server 2021. VM1 connects to Private VM2 has two network adapters.
You need to ensure that VM1 connects to the corporate network by using NAT.
Solution: You connect VM2 to private1 and External1. You install the Remote Access Serverrole on VM2, and you configure NAT in the Routing and Remote Access console. You configure VM1 to use VM2 as the default gateway.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris and Berlin.
The London site contains a web server named Web1 that runs Windows Server 2021.
You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the BranchCache feature, and then you start the BranchCache service. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 5
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 has a virtual machine named VM1 that uses a single VHDX file. VM1 is configured shown in the following table:

You plan to use VM1 as a virtual Machine Template to deploy shielded virtual machines. You need to ensure that VM1 can be used to deploy shielded virtual machines.
What should you run?

• A. the Mount-VHD cmdlet
• B. the Diskpart command
• C. the Set-VHD cmdlet
• D. the Set-VM cmdlet
• E. the Set-VMHost cmdlet
• F. the Set-VMProcessor cmdlet
• G. the Install-WindowsFeature cmdlet
• H. the Optimize-VHD cmdlet

Answer: B

NEW QUESTION 6
You have an IP Address Management (IPAM) deployment that is used to manage all of the DNS servers on your network. IPAM is configured to use Group Policy provisioning.
You discover that a user adds a new mail exchanger (MX) record to one of the DNS zones. You want to identify which user added the record.
You open Event Catalog on an IPAM server, and you discover that the most recent event occurred yesterday. You need to ensure that the operational events in the event catalog are never older than one hour.
What should you do?

• A. From the properties on the DNS zone, modify the refresh interval.
• B. From an IPAM_DNS Group Policy object (GPO), modify the Group Policy refresh interval.
• C. From Task Scheduler, modify the MicrosoftWindowsIPAMAudit task.
• D. From Task Scheduler, create a scheduled task that runs the Update-IpamServer cmdle

Answer: C

NEW QUESTION 7
You have an application named App1. App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment.
You need to ensure that the traffic is distributed evenly among the virtual machines that host App1. What should you include in the environment?

• A. Network Controller and Windows Server Software Load Balancing (SLB) nodes
• B. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes
• C. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes
• D. Network Controller and Windows Server Network Load Balancing (NLB) nodes

Answer: A

Explanation: References:
https://technet.microsoft.com/en-us/library/mt632286.aspx

NEW QUESTION 8
You deploy two servers that run Windows Server 2021. You install the Failovers Clustering feature on both servers. You need to create a workgroup cluster.
What should you do?

• A. Create matching local administrative accounts on both of the server
• B. Assign the same primary DNS suffix to both of the server
• C. Run the New-Cluster cmdlet and specify an administrative access point of None.
• D. Configure both of the server to be in a workgroup named Workgrou
• E. Configure the Cluster Service to log on as Network Servic
• F. Run the New-Cluster cmdlet and specify an administrative access point of DNS.
• G. Create matching local administrative accounts on both of the server
• H. Assign the same primary DNS suffix to both of the server
• I. Run the New-Cluster cmdlet and specify an administrative access point of DNS.
• J. Configure both of the server to be in a workgroup named Workgrou
• K. Configure the Cluster Service to log on as Network Servic
• L. Run the New-Cluster cmdlet and specify an administrative access point of None.

Answer: D

NEW QUESTION 9
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have two servers named Server1 and Server2 that run Windows Server 2021. Server1 and Server2 have the Hyper-V server role installed and are nodes in a failover cluster.
On Server1, an administrator creates a virtual machine named VM1. You need to configure VM1 for high availability.
Which tool should you use?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the Computer Management snap-in
• D. the configurehyperv.exe command
• E. the Disk Management snap-in
• F. the Failover Cluster Manager snap-in
• G. the Hyper-V Manager snap-in
• H. the Server Manager app

Answer: F

Explanation: References:
http://windowsitpro.com/hyper-v/make-vm-highly-available-windows-server-2012

NEW QUESTION 10
You have a server named Server1 that runs Windows Server 2021. You need to configure Server1 as a multitenant RAS Gateway. What should you install on Server1?

• A. the Network Controller server role
• B. the Remote Access server role
• C. the Data Center Bridging feature
• D. the Network Policy and Access Services server role

Answer: B

Explanation: RAS Gateway - Multitenant. You can deploy RAS Gateway as a multitenant, software-based edge gateway and router when you are using Hyper-V Network Virtualization or you have VM networks deployed with virtual Local Area Networks (VLANs). With the RAS Gateway, CloudService Providers (CSPs) and Enterprises can enable datacenter and cloud network traffic routing between virtual and physical networks, including the Internet. With the RAS Gateway, your tenants can use point-so-site VPN connections to access their VM network resources in the datacenter from anywhere. You can also provide tenants with site-to-site VPN connections between their remote sites and your CSP datacenter. In addition, you can configure the RAS Gateway with BGP for dynamic routing, and you can enable Network Address Translation (NAT) to provide Internet access for VMs on VM networks. References:
https://technet.microsoft.com/en-us/windows-server-docs/networking/remote-access/remoteaccess

NEW QUESTION 11
This question is part of a series of questions that use the same similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have three servers named Server1, Server2. Server3 that run Windows Server 2021 Server1 and Server2 have the Hyper-V server role installed. Server3 has the iSCSI Target Server role service installed. You need to create a Hyper-V cluster. Which tool should you use first?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the Computer Management console
• D. the configurehyperv.exe command
• E. the Disk Management console
• F. the Failover Cluster Manager console
• G. the Hyper-V Manager console
• H. the Server Manager Desktop app

Answer: H

Explanation: First we should create New iSCSI Virtual Disks by using: File and Storage Services > iSCSI

NEW QUESTION 12
HOTSPOT
Your company has a testing environment that contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2021. Server1 has IP Address Management (IPAM) installed. IPAM has the following configuration.

The IPAM Overview page from Server Manager is shown in the IPAM Overview exhibit. (Click the Exhibit button.)

The group policy configurations are shown in the GPO exhibit. (Click the Exhibit button.) For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Answer:

Explanation: No domains have been selected in the “Configure Server Discovery” option. Therefore, no automatic discovery will take place. Manual addition of a server will also fail because IPAM needs a domain configured for server verification.

NEW QUESTION 13
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master.
Solution: You open Active Directory Users and Computers, right-click contoso.com in the console tree, and then click Operations Master.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation: This solution only shows the domain FSMO roles, not the forest FSMO roles. References:
https://blogs.technet.microsoft.com/mempson/2007/11/08/how-to-find-out-who-has-your-fsmoroles/

NEW QUESTION 14
You use Application Request Routing (ARR) to make internal web applications available to the Internet by using NTLM authentication.
You need to replace ARR by using the Web Application Proxy. Which server role should you deploy first?

• A. Active Directory Rights Management Services
• B. Active Directory Federation Services
• C. Active Directory Certificate Services
• D. Active Directory Lightweight Directory Services

Answer: B

NEW QUESTION 15
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 hosts a virtual machine named VM1. VM1 is in a workgroup. VM1 is currently in a running state.
You need to create 10 copies of VM1 on Server1 in the least amount of time possible. Which cmdlets should you use?

• A. Stop-VM, and then Import-VM
• B. Export-VM, and then Import-VM
• C. Checkpoint-VM, and then New-VM
• D. Copy-VMFile, and then New-VM

Answer: B

NEW QUESTION 16
You have a DHCP server named Server1.
Server1 has an IPv4 scope that serves 75 client computers that run Windows 10.
When you review the address leases in the DHCP console, you discover several leases for devices that you do not recognize.
You need to ensure that only the 75 Windows 10 computers can obtain a lease from the scope. What should you do?

• A. Run the Add-DhcpServerv4ExclusionRange cmdlet.
• B. Create and enable a DHCP filter.
• C. Create a DHCP policy for the scope.
• D. Run the Add-DhcpServerv4OptionDefinition cmdle

Answer: A

NEW QUESTION 17
You have a server named Server1 that runs Windows Server 2021. You need to install the DNS Server role on Server1.
What should you run?

• A. the Install-Package cmdlet
• B. the setup.exe command
• C. the dnscmd.exe command
• D. the Enable-WindowsOptionalFeature cmdlet

Answer: D

NEW QUESTION 18
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2021.
Server1 has IP Address Management (IPAM) installed. IPAM uses a Windows Internal Database. You install Microsoft SQL Server on Server1.
You plan to move the IPAM database to SQL Server.
You need to create a SQL Server login for the IPAM service account.
For which user should you create the login? To answer, select the appropriate options in the answer area.

Answer:

Explanation: References:
https://blogs.technet.microsoft.com/yagmurs/2014/07/31/moving-ipam-database-from-windowsinternal- database-wid-to-sql-server-located-on-the-same-server/