A Review Of 100% Correct 200-601 exam question

Q1. Profinet has been disabled on a Cisco Industrial Ethernet switch, which.CLI commands correctly enable ProfiNET on VLAN 10? 

A. switch(config)#profinet switch(config)#profinet vlan 10 

B. switch#enable profinet switch(config)#profinet vlan 10 

C. switch(config)#profinet switch(config)#vlan 10 switch(config-vlan)#profinet 

D. switch#enable profinet switch(config)#vlan 10 switch(config-vlan)#profinet 

View Answer

Q2. When troubleshooting a high packet loss condition in the network, the.inspection area has an assessed M.I.C.E. value of M=1, I=1, C=3 and E=1. Which condition could be suspect? 

A. Use of shielded Patch Cables, Bonded on one end only. 

B. Use of unshielded Patch Cables. 

C. Broken seal on bulkhead connector. 

D. Oxidation on Shielded RJ45 Patch Plug 

View Answer

Q3. How are I/O timeout and Safety I/O timeout calculated? 

A. An I/O connection will timeout based on the lower of 4x RPI or 100ms. Safety I/O timeout is calculated as 4xRPI. 

B. An I/O connection will timeout based on the lower of 3x RPI or 100ms. Safety I/O timeout is calculated as 3xRPI. 

C. An I/O connection will timeout based on the lower of 4x RPI or 150ms. Safety I/O timeout is calculated as 2xRPI. 

D. An I/O connection will timeout based on the lower of 3x RPI or 150ms. Safety I/O timeout is calculated as 3xRPI. 

View Answer

Q4. Which in-depth approach is used when deploying defense in an industrial zone? 

A. Use PLCs and control systems from multiple vendors in such a way that the process will become resilient for failures of one vendor. 

B. Deploy two factor authentications for all operators which need to login remote while working from home. 

C. Collect log files at a central location for easy back-up and encryption to provide privacy. 

D. Create multiple zones in the industrial zone and protect / inspect traffic between the zones with firewalls and intrusion monitors. 

View Answer

Q5. Given the CIA triad elements, which ensures first that the data is encrypted and secure, second that the data is trustworthy, and third that the data is accessible by those who need it? 

A. CIA 

B. ICA 

C. ACI 

D. CAI 

View Answer

Q6. Which statement is correct regarding ProfiNET communication classes? 

A. ProfiNET-RT traffic is carried in UDP and TCP packets B. ProfiNET-NRT is used to carry time critical status information 

C. ProfiNET-IRT requires switches with hardware time scheduling capabilities 

D. ProfiNET-NRT is prioritized as Layer-2 Class-of-Service 1 (CoS 1) 

View Answer

Q7. You are making changes to a Stratix 5700 using an Add On Profile (AOP) and a controller which is on-line with RSLogix5000. When do the changes you have made get published to the switch? 

A. While online in RSLogix 5000 software the changes made in the AOP are pushed to the switch after pressing the Set button. 

B. All of the changes are automatically pushed to the switch. 

C. Changes to the AOP can only be made from the switch, not in RSLogix 5000. 

D. RSLogix 5000 will push the changes in the AOP to the Stratix 5700 when you right click on the switch, and choose download to switch 

View Answer

Q8. Refer to the exhbit. Which three elements would enable high availability and predictable performance for a motion control application spread across two switches (with video and I/O traffic)? (Choose three) 

A. Configure QoS to give PTP traffic the highest priority 

B. Fiber optic uplinks 

C. Redundant uplinks 

D. Configure QoS to give I/O traffic the highest priority 

E. Copper uplinks 

F. Interconnect the two switches 

View Answer

Q9. Refer to the exhibit. Which lines represent an I/O connection running at a 20ms RPI? 

A. 2919, 2923, 2926 

B. 2920, 2926, 2929 

C. 2922, 2929, 2935 

D. 2914, 2915, 2916 

View Answer

Q10. A ProfiNET management system operator is unable to add a ProfiNET Conformance Class B device to a SIMATIC management station. The device is connected to interface 

FastEthernet1/3. Based on the provided CLI output, which statement is correct? 

switch#show profinet lldp Fa1/1.port-003-00000 On Fa1/2.port-004-00000 On Fa1/3.port-005-00000 Off Fa1/4.port-006-00000 Off Fa1/5.port-007-00000 On Fa1/6.port-008-00000 Off Fa1/7.port-009-00000 On Fa1/8.port-010-00000 Off 

A. LLDP has been disabled on this switch 

B. The connected device is not sending LLDP packets with ProfiNET extensions 

C. The port label needs to be changed on interface FastEthernet 1/3 to "port-003-00000" 

D. ProfiNET is disabled on this switch 

View Answer