Avant-garde 300-075 Exam Study Guides With New Update Exam Questions

Question No: 10

Refer to the exhibit.

The HQ Cisco Unified Communications Manager has been configured for end-to-end RSVP. The BR Cisco Unified Communications Manager has been configured for local RSVP.

RSVP between the locations assigned to the IP phones and SIP trunks at each site are configured with mandatory RSVP. When a call is placed from the IP phone at HQ to the BR phone at the BR site, which statement is true?

A. The Cisco Unified Communications Manager at HQ will fall back to local RSVP and place the call. No RSVP end-to-end will occur.

B. RSVP end-to-end will occur.

C. The Cisco Unified Communications Manager at HQ will use end-to-end RSVP. The BR Cisco Unified Communications Manager will use local RSVP.

D. The call will fail.

E. The call will proceed as a normal call with no RSVP reservation.

View Answer

Question No: 11

Refer to the exhibit.

The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. To match the US-TEHO pattern

+!, how should the translation pattern be configured?

A. 9001.4085551234 with the Called Party Transformation: Discard Digits PreDot

Prefix Digits Outgoing Calls: +

B. 9.0014085551234 with the Called Party Transformation: Discard Digits PreDot

Prefix Digits Outgoing Calls: +1

C. 900.14085551234 with the Called Party Transformation: Discard Digits PreDot

Prefix Digits Outgoing Calls: +1

D. 900.14085551234 with the Called Party Transformation: Discard Digits PreDot

Prefix Digits Outgoing Calls: +

E. 001.4085551234 with the Called Party Transformation: Prefix Digits Outgoing Calls: +

View Answer

Question No: 12

Refer to the exhibit.

The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number. Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit. Which statement is true?

A. The AAR group system must be configured on the device configuration of the phones.

B. The AAR group system must be configured on the line configuration of the phones.

C. The single AAR group system cannot be used. A second AAR group must be configured in order to have source and destination AAR groups.

D. The AAR group system must be configured under the AAR service parameters.

View Answer

Question No: 13

Which statement about AAR functionality is true?

A. AAR reroutes calls through the PSTN upon WAN failure.

B. AAR reroutes calls through the PSTN when Cisco Unified Communications Manager

CAC blocks a call.

C. AAR reroutes calls through the WAN when the PSTN connection fails.

D. AAR reroutes calls to another phone number when a Cisco IP Phone unregisters.

View Answer

Question No: 14

Refer to the exhibit.

The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. What should the TEHO-US route list configuration consist of?

A. First route group should point only to the U.K. gateway. The second route group should point to the U.S. gateway.

B. First route group should be only the local route group. The second route group should point to the U.S. gateway.

C. First route group should point only to the U.S. gateway. The second route group should be the local route group.

D. The TEHO-US route list should contain only the local route group. The globalized configuration means that the appropriate gateway will be selected automatically.

E. The +! route pattern should point directly to the U.S. gateway.

View Answer

Question No: 15

When an H.323 trunk is added for Call Control Discovery, which statement is true?

A. The H.323 trunk is added by selecting Inter-Cluster Trunk (Non-Gatekeeper Controlled) and Device Protocol Inter-Cluster Trunk. The Enable SAF check box should be selected in the trunk configuration.

B. The H.323 trunk is added by selecting Inter-Cluster Trunk (Non-Gatekeeper Controlled) and Device Protocol Inter-Cluster Trunk. The Trunk Service Type should be Call Control Discovery.

C. The H.323 trunk is added by selecting Call Control Discovery Trunk and then selecting

H.323 as the protocol to be used.

D. The H.323 trunk is added by selecting H.323 Trunk, and selecting Inter-Cluster Trunk as the Device Protocol. The destination IP address field is configured as u2021SAFu2021 to indicate that this trunk is used for SAF.

View Answer

Question No: 16

When implementing a dial plan for multisite deployments, what must be present for SRST to work successfully?

A. dial peers that address all sites in the multisite cluster

B. translation patterns that apply to the local PSTN for each gateway

C. incoming and outgoing COR lists

D. configuration of the gateway as an MGCP gateway

View Answer

Question No: 17

Refer to the exhibit.

How many calls are permitted by the RSVP configuration?

A. one G.711 call

B. two G.729 calls

C. one G.729 call and one G.711 call

D. eight G.729 calls

E. four G.729 calls

View Answer

Question No: 18

Refer to the exhibit.

How many calls can be placed to Cluster B?

A. three G.729 calls

B. one G.711 call

C. one G.711 and three G.729 calls

D. There is no limit for incoming calls to Cluster B. Outgoing calls are limited to one G.711 and three G.729 calls.

View Answer

Question No: 19

Which statement about the function of the "+" symbol in the E.164 format is true?

A. The "+" symbol represents the international country code.

B. The "+" symbol represents the international call prefix.

C. The "+" symbol matches the preceding element one or more times.

D. The "+" symbol matches the preceding element zero or one time.

View Answer