Practical of cisco 300 075 exam question materials and bundle for Cisco certification for customers, Real Success Guaranteed with Updated cisco 300 075 pdf dumps vce Materials. 100% PASS Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) exam Today!


2026 New 300-075 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-075/

Q1. Refer to the exhibit. 

If an IP phone in San Jose roams to New York, which two IP phone settings will be modified by Device Mobility so that the phone can place and receive calls in New York? (Choose two.) 

A. The physical locations are not different, so the configuration of the phone is not modified. 

B. The physical locations are different, so the roaming-sensitive parameters of the roaming device pool are applied. 

C. The device mobility groups are the same, so the Device Mobility-related settings are applied in addition to the roaming-sensitive parameters. 

D. The Device Mobility information is associated with one or more device pools other than the home device pool of the phone, so one of the associated device pools is chosen based on a round-robin load-sharing algorithm. 

E. The Device Mobility information is associated with the home device pool of the phone, so the phone is considered to be in its home location. Device Mobility will reconfigure the roaming-sensitive settings of the phone. 

Answer: B,C 

Q2. Cisco Unified Communications Manager is configured with CAC for a maximum of 10 voice calls. 

Which action routes the 11th call through the PSTN? 

A. Configure an SIP trunk to the ISR. 

B. Configure Cisco Unified Communications Manager AAR. 

C. Configure Cisco Unified Communications Manager RSVP-enabled locations. 

D. Configure Cisco Unified Communications Manager locations. 

Answer: B 

Q3. Which bandwidth amounts are correct for configuring locations? 

A. 8 kb/s for G.729, 64 kb/s for G.711, and 64 kb/s for G.722 

B. 8 kb/s for G.729, 64 kb/s for G.711, and 16 kb/s for G.722 

C. 64 kb/s for G.729, 64 kb/s for G.711, and 64 kb/s for G.722 

D. 8 kb/s for G.729, 8 kb/s for G.711, and 8 kb/s for G.722 

Answer: A 

Q4. Which option is known as the location attribute that the global dialplan replication uses to advertise its dial plan information? 

A. location controller 

B. route pattern 

C. route string 

D. URI 

Answer: C 

Q5. In the case of a VCS cluster, which configuration element is recommended for endpoint H.323 registration? 

A. DNS SRV records pointing to the VCS cluster name 

B. static IP addresses 

C. hostname of the VCS cluster configuration master 

D. hostname of the VCS cluster member peer 

Answer: A 

Q6. When considering Extension Mobility, what happens if a user logs into a phone for which the user does not have a user device profile? 

A. The phone reboots with an error. 

B. If a default device profile for this phone has been configured, it is loaded. 

C. The user cannot log in. 

D. Another user device profile is loaded. 

Answer: B 

Q7. Which two statements describe RSVP-enabled locations-based CAC? (Choose two.) 

A. RSVP can be enabled selectively between pairs of locations. 

B. Using RSVP for CAC simply allows admitting or denying calls based on a logical 

configuration that is ignoring the physical topology. 

C. RSVP is topology aware, but only works with full mesh networks. 

D. An RSVP agent is a Media Termination Point that the call has to flow through. 

E. RSVP and RTP are used between the two endpoints. 

Answer: A,D 

Explanation: 

Incorrect Answer: B, C The RSVP policy that is configured for a location pair overrides the default interlocation RSVP policy that configure in the Service Parameter Configuration window. RSVP supports audio, video, and data pass-through. Video data pass-through allows video and data packets to flow through RSVP agent and media termination point devices Link: https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02rsvp.ht ml#wp1070214 

Q8. Refer to the exhibit. 

All HQ phones are configured to use HQ_MRGL and all BR phones are configured to use BR_MRGL. For the HQ phones always to use the hardware conference bridge as a first choice, which configuration should be implemented? 

A. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. Ensure that the instance ID for the hardware conference bridge is 0. 

B. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. The hardware conference bridge must be configured first. 

C. Assign the hardware conference bridge to HQ_MRG. Configure a second HQ_MRG_2 and assign the software conference bridge to it. Add both the HQ_MRG and HQ_MRG_2 to the HQ_MRGL and list the HQ_MRG first. 

D. Assign the hardware conference bridge to HQ_MRG. Configure a second HQ_MRG_2 and assign the software conference bridge to it. Configure an additional HQ_MRGL_2. Add the HQ_MRG to HQ_MRGL. Add HQ_MRG_2 to HQ_MRGL_2. The HQ_MRGL should be assigned to the HQ phones. The HQ_MRGL_2 should be assigned to the HQ device pool. 

Answer: C 

Q9. Which two statements about the functionality of a gatekeeper are true? (Choose two.) 

A. Cisco Unified Communications Manager has gatekeeper functionality built in. 

B. Cisco Unified Communications Manager registers with a gatekeeper via SIP. 

C. Cisco Unified Communications Manager registers with a gatekeeper via H.323. 

D. A gatekeeper can enable CAC and AAR. 

E. A gatekeeper can enable CAC, but not AAR. 

Answer: C,E 

Q10. For which VoIP protocol does a gatekeeper provide address translation and control access? 

A. H.323 

B. SIP 

C. Skinny 

D. H.248 

Answer: A