Master the 300-080 Troubleshooting Cisco IP Telephony and Video content and be ready for exam day success quickly with this Examcollection 300-080 book. We guarantee it!We make it a reality and give you real 300-080 questions in our Cisco 300-080 braindumps.Latest 100% VALID Cisco 300-080 Exam Questions Dumps at below page. You can use our Cisco 300-080 braindumps and pass your exam.


2026 New 300-080 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-080/

Q1. Refer to the exhibit. 

When a call between two HQ users was being conferenced with a remote user at the BR site, the conference failed. Which configuration would be needed to solve the problem? 

A. The BR_MRG must contain the transcoder device. The BR_MRGL must be assigned to the BR phones. 

B. The HQ_MRG must contain the transcoder device. The HQ_MRGL must be assigned to the HQ phones. 

C. A transcoder should be configured at the remote site and assigned to all remote phones through the BR_MRGL. 

D. The HQ_MRG must contain the transcoder device. The HQ_MRGL must be assigned to the software conference bridge. 

E. Enable the software conference bridge to support G.711 and G.729 codecs in Cisco Unified Communications Manager service parameters. 

Answer: D 

Q2. Which two types of Cisco Unified Communications Manager trace files contain Call Processing information that is helpful for troubleshooting outbound and inbound calling issues? (Choose two.) 

A. Cisco Unified Communications Manager syslog trace 

B. Cisco Unified Communications Manager Dialed Number Analyzer trace 

C. Real Time Monitoring Tool Processes trace 

D. Cisco Unified Communications Manager SDL trace 

E. Cisco Unified Communications Manager Log4Jtrace 

F. Cisco Unified Communications Manager SDI trace 

Answer: D,F 

Q3. When dialing any external SIP URI for a business-to-business call, an endpoint that is registered to the Cisco VCS Control fails to locate the remote endpoint. The same endpoint can successfully call another endpoint that is registered to the Cisco VCS Expressway. How do you resolve this issue? 

A. Add traversal call licensing on the Cisco VCS Expressway. 

B. Add traversal call licensing on the Cisco VCS Control. 

C. Add a multisite option to the endpoint. 

D. Configure a proper DNS zone on the Cisco VCS Expressway. 

E. Configure a traversal zone between the Cisco VCS Control and the Cisco VCS Expressway. 

F. Configure a SIP route pattern in Cisco Unified Communications Manager. 

Answer: D 

Q4. Two phones in the same cluster and at the same site have a call currently connected. The site local H.323 PSTN gateway loses connection with Cisco Unified Communications Manager. Which two results do you expect? (Choose two.) 

A. SRST is active, and all the phones enter SRST mode. 

B. No incoming and outgoing calls are possible. 

C. Cisco Unified SRST is able to receive incoming calls. 

D. The current call is not disconnected. 

E. The phones display "CM Fallback Service Operating." 

Answer: B,D 

Q5. You configured a Cisco ISR G2 as a SIP gateway, but the gateway does not show that it is registered with Cisco Unified Communications Manager. What is causing this issue? 

A. Cisco Unified Communications Manager does not support SIP gateways. 

B. The gateway does not have the UC license installed. 

C. The gateway does not have Cisco Unified Border Element.session licensing..

D. Cisco Unified Communications Manager does not show a SIP gateway as registered if it is not properly configured. 

E. Cisco Unified Communications Manager never shows a SIP gateway as registered even when it is properly configured. 

F. The Cisco.ISR G2 cannot be a SIP gateway. 

Answer: E 

Q6. Which four performance counters are available when monitoring a Cisco MTP device using the Cisco Unified Communications Manager RTMT? (Choose four.) 

A. Resource Total 

B. Resource Available 

C. Out of Resources 

D. Resource Idle 

E. Resource Active 

F. MTP Streams Active 

G. MTP Connection Lost 

H. MTP Instances Active 

Answer: A,B,C,E 

Q7. Which issue would cause an MGCP gateway to fail to register with Cisco Unified Communications Manager? 

A. missing the configuration command isdn bind-l3 ccm-manager under the ISDN interface 

B. mismatched domain name on the MGCP gateway and Cisco Unified Communications Manager gateway configuration 

C. misconfigured route group in Cisco Unified Communications Manager 

D. incorrect MGCP IP address specified in the gateway configuration in Cisco Unified Communications Manager 

Answer: B 

Q8. Refer to topology and Exhibits below: 

What is the reason that this MGCP gateway is not registered with Cisco Unified Communications Manager? 

A. The primary server address is incorrect. 

B. The MGCP domain name is incorrect on either the Cisco Unified Communications Manager or the router. 

C. Backhaul/Redundant link port is incorrect 

D. This MGCP gateway is not down; it is operational. 

Answer: B 

Q9. Which command is used on an IOS Router.that is.acting as a SAF Forwarder to confirm its registration status with a SAF Client? 

A. show ip asf-forwarder status details 

B. show ospf neighbor details 

C. show ip interface details 

D. show cdp neighbor details 

E. show eigrp service-family ipv4 clients details 

F. show service-family asf-forwarder details 

Answer: E 

Q10. Some users report that they cannot dial out from headquarters on their Cisco IP Phones to PSTN users, but others can. Which troubleshooting approach is the most direct to isolate the source of the failure of the users that cannot dial out to the PSTN? 

A. Use DNA to analyze the dialing permissions of the Cisco IP Phones. 

B. Use DNA to generate actual calls to the PSTN. 

C. Use RTMT to analyze the dialing permissions of the Cisco IP Phones. 

D. Use RTMT to generate actual calls to the PSTN. 

Answer: A