It is impossible to pass Cisco examcollection 300 115 exam without any help in the short term. Come to Pass4sure soon and find the most advanced, correct and guaranteed Cisco 300 115 switch practice questions. You will get a surprising result by our Improve SWITCH Implementing Cisco IP Switched Networks practice guides.


2026 New 300-115 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-115/

P.S. Highest Quality 300-115 bible are available on Google Drive, GET MORE: https://drive.google.com/open?id=1VHsb6dx9nuEZoveat99_kZpaJRSN1wlZ


New Cisco 300-115 Exam Dumps Collection (Question 15 - Question 25)

Q1. A network is running VTPv2. After verifying all VTP settings, the network engineer notices that the new switch is not receiving the list of VLANs from the server. Which action resolves this problem?

A. Reload the new switch.

B. Restart the VTP process on the new switch.

C. Reload the VTP server.

D. Verify connected trunk ports.

Answer: D


Q2. For security reasons, the IT manager has prohibited users from dynamically establishing trunks with their associated upstream switch. Which two actions can prevent interface trunking? (Choose two.)

A. Configure trunk and access interfaces manually.

B. Disable DTP on a per interface basis.

C. Apply BPDU guard and BPDU filter.

D. Enable switchport block on access ports.

Answer: A,B


Q3. Refer to the exhibit.

How can the traffic that is mirrored out the GigabitEthernet0/48 port be limited to only traffic that is received or transmitted in VLAN 10 on the GigabitEthernet0/1 port?

A. Change the configuration for GigabitEthernet0/48 so that it is a member of VLAN 10.

B. Add an access list to GigabitEthernet0/48 to filter out traffic that is not in VLAN 10.

C. Apply the monitor session filter globally to allow only traffic from VLAN 10.

D. Change the monitor session source to VLAN 10 instead of the physical interface.

Answer: C


Q4. Refer to the exhibit.

How many bytes are added to each frame as a result of the configuration?

A. 4-bytes except the native VLAN

B. 8-bytes except the native VLAN

C. 4-bytes including native VLAN

D. 8-bytes including native VLAN

Answer: A


Q5. Ferris Plastics, Inc. is a medium sized company, with an enterprise network (access, distribution and core switches) that provides LAN connectivity from user PCs to corporate servers. The distribution switches are configured to use HSRP to provide a high availability solution.

u2022 DSW1 -primary device for VLAN 101 VLAN 102 and VLAN 105

u2022 DSW2 - primary device for VLAN 103 and VLAN 104

u2022 A failure of GigabitEthemet1/0/1 on primary device should cause the primary device to release its status as the primary device, unless GigabitEthernet1/0/1 on backup device has also failed.

Troubleshooting has identified several issues. Currently all interfaces are up. Using the running configurations and show commands, you have been asked to investigate and respond to the following question.

If GigabitEthemet1/0/1 on DSW2 is shutdown, what will be the resulting priority value of the VLAN 105 HSRP group on router DSW2?

A. 90

B. 100

C. 150

D. 200

Answer: A


Q6. Which statement describes what happens if all VSL connections between the virtual switch members are lost?

A. Both virtual switch members cease to forward traffic.

B. The VSS transitions to the dual active recovery mode, and both virtual switch members continue to forward traffic independently.

C. The virtual switch members reload.

D. The VSS transitions to the dual active recovery mode, and only the new active virtual switch continues to forward traffic.

Answer: D


Q7. What does the command vlan dot1q tag native accomplish when configured under global configuration?

A. All frames within the native VLAN are tagged, except when the native VLAN is set to 1.

B. It allows control traffic to pass using the non-default VLAN.

C. It removes the 4-byte dot1q tag from every frame that traverses the trunk interface(s).

D. Control traffic is tagged.

Answer: D


Q8. Refer to the exhibit.

Users of PC-1 experience slow connection when a webpage is requested from the server. To increase bandwidth, the network engineer configured an EtherChannel on interfaces Fa1/0 and Fa0/1 of the server farm switch, as shown here:

Server_Switch#sh etherchannel load-balance

EtherChannel Load-Balancing Operational State (src-mac):

Non-IP: Source MAC address

IPv4: Source MAC address

IPv6: Source IP address

Server_Switch#

However, traffic is still slow. Which action can the engineer take to resolve this issue?

A. Disable EtherChannel load balancing.

B. Upgrade the switch IOS to IP services image.

C. Change the load-balance method to dst-mac.

D. Contact Cisco TAC to report a bug on the switch.

Answer: C


Q9. Which protocol specified by RFC 2281 provides network redundancy for IP networks, ensuring that user traffic immediately and transparently recovers from first-hop failures in network edge devices or access circuits?

A. ICMP

B. IRDP

C. HSRP

D. STP

Answer: C


Q10. Which VLAN range is eligible to be pruned when a network engineer enables VTP pruning on a switch?

A. VLANs 1-1001

B. VLANs 1-4094

C. VLANs 2-1001

D. VLANs 2-4094

Answer: C


Q11. A network engineer tries to configure storm control on an EtherChannel bundle. What is the result of the configuration?

A. The storm control settings will appear on the EtherChannel, but not on the associated physical ports.

B. The configuration will be rejected because storm control is not supported for EtherChannel.

C. The storm control configuration will be accepted, but will only be present on the physical interfaces.

D. The settings will be applied to the EtherChannel bundle and all associated physical interfaces.

Answer: D


Recommend!! Get the Highest Quality 300-115 dumps in VCE and PDF From Examcollectionplus, Welcome to download: https://www.examcollectionplus.net/vce-300-115/ (New 364 Q&As Version)