Accurate of 200-401 download materials and resource for Cisco certification for IT examinee, Real Success Guaranteed with Updated 200-401 pdf dumps vce Materials. 100% PASS Managing Industrial Networks with Cisco Networking Technologies exam Today!


2026 New 200-401 Exam Dumps with PDF and VCE Free: https://www.surepassexam.com/200-401-exam-dumps.html

Q1. - (Topic 4) 

You are a called upon to troubleshoot connectivity problems to a network device on a production floor. You have used ping and traceroute to verify that you cannot connect to the device from the management network. The network is 209.165.202.128/27 and the device has been given the IP address 209.165.202.158 and mask 255.255.255.224. You have verified that you can reach the device with your computer connected to the same switch as the device..What could be the cause of this problem? 

A. The device is set to the wrong subnet mask. 

B. The device is set to the wrong IP address. 

C. The device has no IP default gateway. 

D. The device is connected to a switchport in the wrong VLAN. 

Answer: C 

Q2. - (Topic 4) 

With a Cisco IE 2000 switch, what does a port status LED indicate when it is solid green? 

A. The port is sending or receiving data. 

B. A link is present. 

C. No link is present. 

D. There is a link fault. 

E. The port is not forwarding. 

Answer: B 

Q3. - (Topic 4) 

With a Cisco IE 2000 switch, what does a port status LED indicate when it is alternating green and amber? 

A. The port is sending or receiving data. 

B. A link is present. 

C. No link is present. 

D. There is a link fault. 

E. The port is not forwarding. 

Answer: D 

Q4. - (Topic 4) 

In which two ways could you minimize the impact of monitoring an industrial network? (Choose two.) 

A. Send random messages to a device and see what the response is. 

B. Do frequent ping sweeps to industrial devices to check for their proper operations. 

C. Make a copy of all the network traffic and analyze it offline. 

D. Use an industrial-network-grade IDS-IPS system. 

Answer: C,D 

Q5. - (Topic 4) 

A network administrator has subnetted the 172.16.0.0 network using a subnet mask of 

255.255.255.192. A duplicate IP address of 172.16.2.120 has accidentally been configured on a workstation in the network. The technician on the plant floor must assign this workstation a new IP address within that same subnetwork. Which address should be assigned to the workstation? 

A. 172.16.1.80 

B. 172.16.2.80 

C. 172.16.1.64 

D. 172.16.2.64 

E. 172.16.2.127 

F. 172.16.2.128 

Answer: B 

Q6. - (Topic 3) 

For which three issues should fiber-optic network segments be tested? (Choose three.) 

A. attenuation 

B. near-end crosstalk 

C. length 

D. polarity 

E. jitter 

F. tensile stress 

Answer: A,C,D 

Q7. - (Topic 5) 

What does the Cisco PSIRT issue for significant security issues that directly involve Cisco products and require an upgrade, fix, or other customer action? 

A. Cisco Security Advisories 

B. Cisco Security Responses 

C. Cisco Security Notices 

D. Cisco Security Bulletins 

Answer: A 

Q8. - (Topic 1) 

Which of the following correctly pairs the dotted decimal subnet mask with the correct number of binary bits that represent the subnet mask? 

A. 255.255.255.192 and /25 

B. 255.255.255.248 and /28 

C. 255.255.255.224 and /26 

D. 255.255.255.248 and /27 

E. 255.255.255.240 and /28 

F. 255.255.255.240 and /16 

Answer: E