Cause all that matters here is passing the Cisco 200-401 exam. Cause all that you need is a high score of 200-401 Managing Industrial Networks with Cisco Networking Technologies exam. The only one thing you need to do is downloading Examcollection 200-401 exam study guides now. We will not let you down with our money-back guarantee.


2026 New 200-401 Exam Dumps with PDF and VCE Free: https://www.surepassexam.com/200-401-exam-dumps.html

Q1. - (Topic 5) 

What is the purpose of a time domain reflectometer? 

A. It uses pulses to locate and test for sheath faults, damaged conductors, loose connectors, splices, bridge taps, split pairs, and other problems. 

B. It opens shorts and pinholes in cable shielding. 

C. It correlates the returned light pulses with a location in the fiber. 

D. It opens kinks and mismatched cable connectors. 

Answer: A 

Q2. - (Topic 5) 

What is a characteristic of cables that are used in articulating equipment arms? 

A. fiber-optic zip-cord construction 

B. shielded copper twisted pair 

C. high flex rated cable 

D. type PLTC.cable 

Answer: C 

Q3. - (Topic 2) 

What are the two most relevant factors in determining the class of administration that is required to maintain the telecommunications infrastructure? (Choose two.) 

A. the size of the infrastructure 

B. the complexity of the infrastructure 

C. the age of the infrastructure 

D. the industry that the infrastructure supports 

E. the physical environment of the infrastructure 

Answer: A,B 

Q4. - (Topic 5) 

Exhibit: 

Refer to the exhibit. A technician enters the exhibited commands to configure a new router on the plant floor, but receives an error message when attempting to save the configuration. What can the technician do to correct the problem? 

A. Enter the correct command. 

B. Enter the command at the correct prompt. 

C. Upgrade the amount of flash memory in the router. 

D. Erase NVRAM to make room for the configuration file. 

E. Add NVRAM because there is not enough room for the configuration file. 

Answer: A 

Q5. DRAG DROP - (Topic 2) 

Answer:  

Q6. - (Topic 4) 

A network administrator has subnetted the 172.16.0.0 network using a subnet mask of 

255.255.255.192. A duplicate IP address of 172.16.2.120 has accidentally been configured on a workstation in the network. The technician on the plant floor must assign this workstation a new IP address within that same subnetwork. Which address should be assigned to the workstation? 

A. 172.16.1.80 

B. 172.16.2.80 

C. 172.16.1.64 

D. 172.16.2.64 

E. 172.16.2.127 

F. 172.16.2.128 

Answer: B 

Q7. - (Topic 5) 

What does the Cisco PSIRT issue for significant security issues that directly involve Cisco products and require an upgrade, fix, or other customer action? 

A. Cisco Security Advisories 

B. Cisco Security Responses 

C. Cisco Security Notices 

D. Cisco Security Bulletins 

Answer: A 

Q8. - (Topic 4) 

At which Layer would you check ACLs for TCP ports being blocked? 

A. Layer 1 

B. Layer 2 

C. Layer 3 

D. Layer 4 

Answer: D 

Q9. - (Topic 4) 

You are troubleshooting a connectivity problem and want to isolate the problem. You suspect that a router on the route to an unreachable network is at fault. Which command would you issue to see where the packets stop? 

A. router#ping 

B. router#tracert 

C. router#show ip route 

D. router#show cdp neighbors 

E. router#traceroute 

Answer: E 

Q10. - (Topic 5) 

How does the optical time domain reflectometer use "backscattered" light to make measurements? 

A. It uses pulses to locate and test for sheath faults, damaged conductors, loose connectors, splices, bridge taps, split pairs, and other problems. 

B. It performs wiremapping to measure that all pins are correctly connected. 

C. It correlates the returned light pulses with a location in the fiber. 

D. It measures light-pulse width to measure that all pins are correctly connected. 

Answer: C