Act now and download your Cisco 200-401 test today! Do not waste time for the worthless Cisco 200-401 tutorials. Download Rebirth Cisco Managing Industrial Networks with Cisco Networking Technologies exam with real questions and answers and begin to learn Cisco 200-401 with a classic professional.


2024 New 200-401 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/200-401/

Q1. - (Topic 4) 

What two things does a router do when it forwards a packet? (Choose two.) 

A. switches the packet to the appropriate outgoing interfaces 

B. computes the destination host address 

C. determines the next hop on the path 

D. updates the destination IP address 

E. forwards ARP requests 

Answer: A,C 

Q2. - (Topic 5) 

A router is not operating as expected and the network administrator wants to verify that the router booted using the correct IOS image. Which command should be used to determine which IOS is running on the router? 

A. show flash 

B. show version 

C. show memory 

D. show startup-config 

E. show config-register 

Answer:

Q3. - (Topic 4) 

At which Layer would you use trace route to validate the path? 

A. Layer 1 

B. Layer 2 

C. Layer 3 

D. Layer 4 

Answer:

Q4. - (Topic 1) 

Which option allows an EtherNet/IP I/O device to be safely installed where it is subject to water immersion? 

A. The device is rated IP20 and the power wiring is installed securely to the terminal block. 

B. The device is rated IP67 and a power cordset.is used. 

C. The device is rated IP67 and immersed to 10 m. 

D. The device is rated IP20 and immersed to 10 m. 

Answer:

Q5. - (Topic 5) 

What do deflections indicate to the time domain reflectometer user? 

A. They indicate splices, water in the cable, split pairs, and discontinuities or faults. 

B. Do not connect live circuit cables to the input of the time domain reflectometer. Connect the cable that is being tested to the cable connector on the front panel of the time domain reflectometer. 

C. Upward deflections indicate high-impedance mismatches or opens, and downward deflections indicate shorts or low-impedance mismatches. 

D. They are used to select the I/O impedance of the time domain reflectometer. You can select 50, 75, 95, or.125? impedances. 

Answer:

Q6. - (Topic 4) 

With a Cisco IE 2000 switch, what does a port status LED indicate when it is solid amber? 

A. The port is sending or receiving data. 

B. A link is present. 

C. No link is present. 

D. There is a link fault. 

E. The port is not forwarding. 

Answer:

Q7. - (Topic 2) 

Which two ports does EtherNet/IP use to communicate? (Choose two.) 

A. TCP 44818 

B. UDP 44818 

C. TCP 502 

D. UDP 502 

E. TCP 2222 

F. UDP 2222 

Answer: A,F 

Q8. - (Topic 4) 

You are a called upon to troubleshoot connectivity problems to a network device on a production floor. You have used ping and traceroute to verify that you cannot connect to the device from the management network. The network is 209.165.202.128/27 and the device has been given the IP address 209.165.202.158 and mask 255.255.255.224. You have verified that you can reach the device with your computer connected to the same switch as the device..What could be the cause of this problem? 

A. The device is set to the wrong subnet mask. 

B. The device is set to the wrong IP address. 

C. The device has no IP default gateway. 

D. The device is connected to a switchport in the wrong VLAN. 

Answer: